APC Power-Saving Back-UPS ES 8 Outlet 700VA 230V CEE 7/7 – BE700G-GR
Overview
BE700G-GR Features
APC Power-Saving Back-UPS ES 8 Outlet 700VA 230V CEE 7/7
-
Adjustable voltage sensitivityProvides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
-
Audible alarmsProvides notification of changing utility power and UPS power conditions
-
Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.
-
Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenance
-
Battery replacement without toolsEnables fast battery replacement, lowering Mean Time to Repair (MTTR).
-
Battery-protected and surge-only outletsReserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
-
Cold-start capableProvides temporary battery power when the utility power is out.
-
Dataline surge protectionProvides protection of connected equipment from power surges on the data lines.
-
EMI and RFI noise filteringReduces line noise that can cause data loss and keyboard errors.
-
Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replaced
-
Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse.
-
Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
-
USB connectivityProvides management of the UPS via a USB port (not available on all models).
-
User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Back-UPS Features & Benefits
Marketing Features
-
Battery-protected and surge-only outletsReserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Safety
-
Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Protection
-
Battery and surge protected outletsBack up and protect your hardware and data during power outages, surges and spikes.
-
Surge only outletsProtect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Manageability
-
LED status displayQuickly understand unit and power status with visual indicators.
-
Audible alarmsProvides notification of changing utility power and UPS power conditions
Availability
-
Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.
-
Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.
-
Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenance
Detailed Tech Specification
Output
-
Output power capacity
405Watts / 700VA
-
Max Configurable Power (Watts)
405Watts / 700VA
-
Nominal Output Voltage
230V
-
Output Frequency (sync to mains)
47 – 63 Hz
-
Output Frequency (not synced)
50Hz +/- 0.1% for 50Hz nominal
-
Topology
Standby
-
Waveform type
Stepped approximation to a sinewave
-
Output Connections(4) Schuko CEE 7 (selector_surgetitle)(4) Schuko CEE 7 (Battery Backup)
-
Output Voltage Tolerance
+/- 5% static and 100% load step
-
Transfer Time
6ms typical : 10ms maximum
Input
-
Nominal Input Voltage
230V
-
Input frequency
50/60 Hz +/- 5 Hz (auto sensing)
-
Input Connections
Schuko CEE 7/7P
-
Cord Length
1.83meters
-
Input voltage range for main operations
180 – 266V
-
Maximum Input Current
10.0A
Batteries & Runtime
-
Battery type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
-
Typical recharge time
16hour(s)
-
Replacement Battery
-
Expected Battery Life (years)
3 – 5
-
Runtime
-
Efficiency
Communications & Management
-
Interface Port(s)
USB
-
Control panel
LED status display with On Line : On Battery : Replace Battery and Overload indicators
Surge Protection and Filtering
-
Surge energy rating
310Joules
-
Data Line Protection
Analog phone line for phone/fax/modem/DSL (RJ-11 connector), Network line – 10/100 Base-T Ethernet (RJ-45 connector)
-
Filtering
Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449
Physical
-
Maximum Height
89mm , 8.9CM
-
Maximum Width
224mm , 22.4CM
-
Maximum Depth
311mm , 31.1CM
-
Net Weight
6.93KG
-
Shipping weight
7.84KG
-
Shipping Height
127mm , 12.7CM
-
Shipping Width
279mm , 27.9CM
-
Shipping Depth
400mm , 40.0CM
-
Color
Black
-
Master Carton Dimensions (Length x Width x Height)
324mm
-
Master Carton Units
2.0
-
Master Carton Weight
16.36
-
Pallet Dimensions
48inches
-
# of Layers per Pallet
4.0
-
# of Units per Layer per Pallet
20.0
-
Pallet Weight
1400.0lbs.
-
Units per Pallet
48.0
-
SCC Codes
1073130427170 0
Environmental
-
Operating Temperature
0 – 40 °C
-
Operating Relative Humidity
0 – 95 %
-
Operating Elevation
0-3000meters
-
Storage Temperature
-15 – 40 °C
-
Storage Relative Humidity
0 – 95 %
-
Storage Elevation
0-15000meters
-
Audible noise at 1 meter from surface of unit
40.0dBA
Conformance
Approvals
CE
Equipment protection policy
Lifetime : 100000 Euro
Standard warranty
2 years repair or replace, 3 years repair or replace for European Union countries
Sustainable Offer Status
RoHS
Compliant
REACH
REACH: Contains No SVHCs
PEP
Available in Documentation tab
EOLI
Available in Documentation tab
Reviews
There are no reviews yet.