APC Back-UPS CS 500VA 120V beige 6 NEMA outlets (3 surge) – BK500
Overview
BK500 Features
Run time for load
3m 24s
Max. Capacity Used
Output power capacity
300 Watts / 500VA
Output Connections
(3) NEMA 5-15R (Surge Protection)
(3) NEMA 5-15R (Battery Backup)
Nominal Output Voltage
120V
Nominal Input Voltage
120V
Input Connections
NEMA 5-15P
Cord Length
6ft (1.8meters)
APC Back-UPS CS 500VA, 120V, beige, 6 NEMA outlets (3 surge)
Battery Backup & Surge Protector for Electronics and Computers
Includes: CD with software, Cord management straps, USB cable, User manual
- Building Wiring Fault Indicator
This LED informs users of potentially dangerous wiring problems in the wall circuit.
- Cold-start capable
Provides temporary battery power when the utility power is out.
- Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
- Disconnected battery notification
Warns when a battery is not available to provide backup power.
- Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
- Lifetime data recovery warranty
Provides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit.
- Serial connection
Use your PC to access additional power protection and management features for your UPS via a serial port.
- Simple battery replacement
Increases UPS availability by allowing quick, easy battery replacement.
- Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
- USB connection
Use your PC to access additional power protection and management features for your UPS via a USB Port.
Back-UPS Features & Benefits
Manageability
Audible alarms
Provides notification of changing utility power and UPS power conditions
LED status display
Quickly understand unit and power status with visual indicators.
Availability
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Protection
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes .
Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Marketing features
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Safety
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Detailed Tech Specification
Output
Max Configurable Power (Watts)
300 Watts / 500VA
Output Frequency (sync to mains)
50/60 Hz +/- 3 Hz Sync to mains
Topology
Standby
Waveform type
Stepped approximation to a sinewave
Maximum Output Current
10
Transfer Time
8 ms typical : 12 ms maximum
Input
Input frequency
50/60 Hz +/- 3 Hz Auto-sensing
Input voltage range for main operations
98 – 140V
Number of Power Cords
1
Batteries & Runtime
Battery type
Lead-acid battery
Typical recharge time
8hour(s)
Nominal Battery Voltage
12 V
Replacement Battery
Expected Battery Life (years)
4 – 6
RBC Quantity
1
Battery Charge Power (Watts)
10 Watts
Battery Volt-Amp-Hour Capacity
106
Runtime
Efficiency
Communications & Management
Interface Port(s)
Optional Simple Signalling RS232 cable, USB
Control panel
LED status display with on line : on battery : replace battery and overload indicators
Audible Alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Surge Protection and Filtering
Surge energy rating
480Joules
Data Line Protection
RJ11 analog phone line for phone/fax/modem/DSL
Filtering
Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449
Physical
Maximum Height
6.5inches (165MM, 16.5CM)
Maximum Width
3.58inches (91MM, 9.1CM)
Maximum Depth
11.18inches (284MM, 28.4CM)
Net Weight
13.82lbs. (6.27KG)
Shipping weight
15.32lbs. (6.95KG)
Shipping Height
10.35inches (263MM, 26.3CM)
Shipping Width
6.89inches (175MM, 17.5CM)
Shipping Depth
14.06inches (357MM, 35.7CM)
Color
Beige
Master Carton Dimensions (Length x Width x Height)
14.6inches (371MM)
Master Carton Units
2.0
Master Carton Weight
31.5lbs. (14.29)
Units per Pallet
36.0
SCC Codes
10731304016301
Environmental
Operating Temperature
32 – 104 °F (0 – 40 °C)
Operating Relative Humidity
0 – 95 %
Operating Elevation
0 – 10000ft (0 – 3048meters)
Storage Temperature
-15 – 45 °C
Storage Relative Humidity
0 – 95 %
Storage Elevation
0 – 50000ft (0 – 15240meters)
Audible noise at 1 meter from surface of unit
45.0dBA
Online thermal dissipation
24.0BTU/hr
Conformance
Approvals
California Energy Commission (CEC), cUL listed, ENERGY STAR V2.0 (USA), FCC part 15 class B, Industry Canada, UL 1778
Equipment protection policy
Lifetime : $100000
Standard warranty
3 years repair or replace
Sustainable Offer Status
RoHS
Compliant
PEP
Available in Documentation tab
EOLI
Available in Documentation tab
Proposition 65 Warning
Available in Documentation tab
Reviews
There are no reviews yet.