APC Back-UPS 1100VA, 230V, AVR, Universal and IEC Sockets – BX1100LI-MS
APC Back-UPS 1100VA, 230V, AVR, Universal and IEC Sockets
-
Battery Backup & Surge Protector for Electronics and Computers
-
Includes: User Manual, Warranty card
Overview
BX1100LI-MS Features
APC Back-UPS 1100VA, 230V, AVR, Universal and IEC Sockets
-
Audible alarmsProvides notification of changing utility power and UPS power conditions
-
Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.
-
Automatic Voltage Regulation (AVR)Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
-
Battery backup and surge protectionOutlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.
-
LED IndicatorsProvide easy-to-read status of the unit and utility power conditions.
-
Resettable circuit breakersEnables a quick recovery from overload events.
Back-UPSFeatures & Benefits
Protection
Surge only outlets
Battery and surge protected outlets
Manageability
LED status display
Audible alarms
Availability
Battery failure notification
Automatic self-test
Intelligent battery management
Marketing Features
Battery-protected and surge-only outlets
Safety
Safety-agency approved
Detailed Tech Specification
Output
-
Output power capacity
550Watts / 1.1 kVA
-
Max Configurable Power (Watts)
550Watts / 1.1 kVA
-
Nominal Output Voltage
230V
-
Output Frequency (sync to mains)
50/60 Hz +/-1 Hz
-
Output Frequency (not synced)
50/60 Hz +/-1 Hz
-
Topology
Line Interactive
-
Waveform type
Stepped approximation to a sinewave
-
Output Connections(2) IEC 320 C13 (Battery Backup)
-
Transfer Time
4ms typical : 6ms maximum
Input
-
Nominal Input Voltage
230V
-
Input frequency
50/60 Hz +/- 3 Hz (auto sensing)
-
Input Connections
IEC-320 C14, NEMA 5-15P
-
Cord Length
1.22meters
-
Input voltage range for main operations
150 – 280 V
-
Number of Power Cords
1
-
Type of Input Protection Required
3-pole breaker
-
Maximum Input Current
10.0A
-
Input Power Factor at Full Load
0.5
Batteries & Runtime
-
Battery type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
-
Included Battery Modules
1
-
Typical recharge time
6hour(s)
-
Replacement Battery
-
Expected Battery Life (years)
2 – 4
-
Runtime
-
Efficiency
Communications & Management
-
Control panel
LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : and Overload Indicators
-
Audible Alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Surge Protection and Filtering
-
Surge energy rating
273Joules
Physical
-
Maximum Height
215mm , 21.5cm
-
Maximum Width
130mm , 13.0cm
-
Maximum Depth
336mm , 33.6cm
-
Net Weight
9.2kg
-
Shipping weight
10.6kg
-
Shipping Height
295mm , 29.5cm
-
Shipping Width
245mm , 24.5cm
-
Shipping Depth
440mm , 44.0cm
-
Color
Black
Environmental
-
Operating Environment
0 – 40 °C
-
Operating Relative Humidity
0 – 95 %
-
Operating Elevation
0-3000meters
-
Storage Temperature
-15 – 40 °C
-
Storage Relative Humidity
0 – 95 %
-
Storage Elevation
0-9000meters
-
Audible noise at 1 meter from surface of unit
45.0dBA
Conformance
-
ApprovalsCE, WEEE
-
Standard warranty2 years repair or replace
Sustainable Offer Status
-
RoHS
Compliant
-
REACH
REACH: Contains No SVHCs