Ubiquiti airMAX 2.4 GHz Loco MIMO, airMAX – LocoM2
Overview
The NanoStation locoM2 Indoor/Outdoor airMAX CPE from Ubiquiti Networks is a cost-effective and reliable solution for high performance. It features up to 10km of range performance, 25+Mb/s of throughput performance, an intuitive AirOS by Ubiquiti. The NanoStation Loco also features broadband wireless CPE technology. NanoStation5 Loco exhibits optimal antenna performance.
Leading-Edge Industrial Design
Ubiquiti Networks sets the bar for the world’s first low-cost and efficient broadband Customer Premises Equipment (CPE) with the original NanoStation®. The NanoStationM and NanoStationlocoM take the same concept to the future with sleek and elegant form factors, along with integrated airMAX® (MIMO TDMA protocol) technology.
The low cost, high performance, and small form factor of NanoStationM and NanoStationlocoM make them extremely versatile and economical to deploy.
NanoStationM used as powerful clients in an airMAX PtMP (Point-to-Multi-Point) network setup.
Utilize airMAX Technology
Unlike standard Wi-Fi protocol,
Ubiquiti’s Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using pre-designated time slots scheduled by an intelligent AP controller.
This “time slot” method eliminates hidden node collisions and maximizes airtime efficiency. It provides many magnitudes of performance improvements in latency, throughput, and scalability compared to all other outdoor systems in its class.
Intelligent QoS Priority is given to voice/video for seamless streaming.
Scalability High capacity and scalability.
Long Distance Capable of high-speed, carrier-class links.
Latency Multiple features dramatically reduce noise.
- Only NanoStationM models
Dual Ethernet
Connectivity1 The NanoStationM provides a secondary Ethernet port with |
Intelligent PoE2
The remote hardware reset circuitry of the NanoStationM allows the device to be remotely reset from the |
Use two NanoStationM devices to create a PtP link.
- Remote reset is an option that is sold separately as the POE-24. The NanoStationM includes a 24V PoE adapter without remote reset.
Software
airOS® is an intuitive, versatile, highly developed Ubiquiti firmware technology. It is exceptionally intuitive and was designed to require no training to operate. Behind the user interface is a powerful firmware architecture, which enables high-performance, outdoor multi-point networking.
- Protocol Support
- Ubiquiti Channelization
- Spectral Width Adjustment
- ACK Auto-Timing
- AAP Technology
- Multi-Language Support
Integrated on all Ubiquiti M products, airView® provides advanced spectrum analyzer functionality: waterfall, waveform, and real-time spectral views allow operators to identify noise signatures and plan their networks to minimize noise interference.
- Waterfall Aggregate energy over time for each frequency.
- Waveform Aggregate energy collected.
- Real-time Energy is shown in real time as a function of frequency.
- Recording Automize AirView to record and report results.
airControl® is a powerful and intuitive, web-based server network management application, which allows operators to centrally manage entire networks of Ubiquiti devices.
- Network Map
- Monitor Device Status
- Mass Firmware Upgrade
- Web UI Access
- Manage Groups of Devices
- Task Scheduling
Specification
locoM2 |
||||
Dimensions | 161 x 31 x 80 mm (6.31 x 1.22 x 3.15″) | |||
Weight | 180 g (6.35 oz) | |||
Power Supply (PoE) | 24V, 0.5A | |||
Max. Power Consumption | 5.5W | |||
Power Method | Passive PoE (Pairs 4, 5+; 7, 8 Return) | |||
Operating Frequency | 2412-2462 MHz | |||
Gain | 8.5 dBi | |||
Networking Interface | (1) 10/100 Ethernet Port | |||
Processor Specs | Atheros MIPS 24Kc, 400 MHz | |||
Memory | 32 MB SDRAM, 8 MB Flash | |||
Frequency | 2.4 GHz | |||
Cross-pol Isolation | 20 dB Minimum | |||
Max. VSWR | 1.4:1 | |||
Beamwidth | 60° (H-pol) / 60° (V-pol) / 60° (Elevation) | |||
Polarization | Dual Linear | |||
Enclosure | Outdoor UV Stabilized Plastic | |||
Mounting | Pole-Mount (Kit Included) | |||
Operating Temperature | -30 to 75° C (-22 to 167° F) | |||
Operating Humidity | 5 to 95% Noncondensing | |||
Wireless Approvals | FCC Part 15.247, IC RS210, CE | |||
RoHS Compliance | Yes | |||
Shock & Vibration | ETSI300-019-1.4 |
Output Power: 23 dBm |
|||||
2.4 GHz TX Power Specifications | 2.4 GHz RX Power Specifications | ||||
Data Rate/MCS | Avg. TX | Tolerance | Data Rate/MCS | Sensitivity | Tolerance |
1-24 Mbps | 23 dBm | ± 2 dB | 1-24 Mbps | -83 dBm | ± 2 dB |
36 Mbps | 21 dBm | ± 2 dB | 36 Mbps | -80 dBm | ± 2 dB |
48 Mbps | 19 dBm | ± 2 dB | 48 Mbps | -77 dBm | ± 2 dB |
54 Mbps | 18 dBm | ± 2 dB | 54 Mbps | -75 dBm | ± 2 dB |
MCS0 | 23 dBm | ± 2 dB | MCS0 | -96 dBm | ± 2 dB |
MCS1 | 23 dBm | ± 2 dB | MCS1 | -95 dBm | ± 2 dB |
MCS2 | 23 dBm | ± 2 dB | MCS2 | -92 dBm | ± 2 dB |
MCS3 | 23 dBm | ± 2 dB | MCS3 | -90 dBm | ± 2 dB |
MCS4 | 22 dBm | ± 2 dB | MCS4 | -86 dBm | ± 2 dB |
MCS5 | 20 dBm | ± 2 dB | MCS5 | -83 dBm | ± 2 dB |
MCS6 | 18 dBm | ± 2 dB | MCS6 | -77 dBm | ± 2 dB |
MCS7 | 17 dBm | ± 2 dB | MCS7 | -74 dBm | ± 2 dB |
MCS8 | 23 dBm | ± 2 dB | MCS8 | -95 dBm | ± 2 dB |
MCS9 | 23 dBm | ± 2 dB | MCS9 | -93 dBm | ± 2 dB |
MCS10 | 23 dBm | ± 2 dB | MCS10 | -90 dBm | ± 2 dB |
MCS11 | 23 dBm | ± 2 dB | MCS11 | -87 dBm | ± 2 dB |
MCS12 | 22 dBm | ± 2 dB | MCS12 | -84 dBm | ± 2 dB |
MCS13 | 20 dBm | ± 2 dB | MCS13 | -79 dBm | ± 2 dB |
MCS14 | 18 dBm | ± 2 dB | MCS14 | -78 dBm | ± 2 dB |
MCS15 | 17 dBm | ± 2 dB | MCS15 | -75 dBm | ± 2 dB |
Reviews
There are no reviews yet.