Synology E10G21-F2 Network Interface Card – E10G21-F2

 

 

E10G21-F2

Dual-port 10GbE SFP+ add-in card for Synology servers

---

 

Overview

 

Features

Link Aggregation

Combine the E10G21-F2’s two 10GbE ports into a Link Aggregation group to enable higher simultaneous throughput, port failover, and load balancing.

---

 

Detailed Tech Specification

 

Hardware Specs

General	Host Bus Interface	PCIe 3.0 x8
	Bracket Height	Low Profile and Full Height
	Size (Height x Width x Depth)	69 mm x 168 mm x 17.3 mm
	Operating Temperature	0°C to 40°C (32°F to 104°F)
	Storage Temperature	-20°C to 60°C (-5°F to 140°F)
	Relative Humidity	5% to 95% RH
	Warranty	5 Years
	Notes	Supports PCIe upconfigure to reduce link width to conserve power. The warranty period starts from the purchase date as stated on your purchase receipt. (Learn more)
Network	IEEE Specification Compliance	IEEE 802.3ad Link Aggregation IEEE 802.3ae 10Gbps Ethernet
	Data Transfer Rates	10 Gbps
	Supported Features	TCP Segmentation Offload (TSO) Large Send Offload (LSO) Receive Side Scaling (RSS) Generic Receive Offload (GRO) Generic Segmentation Offload (GSO) 1.5 – 9 KB Jumbo Frame Offloaded storage over Ethernet Non-offloaded storage over Ethernet TCP/UDP Checksum Offload Transmit side scaling (TSS)
Compatibility
Applied Models	FS series:FS3400, FS3017, FS2017 SA series:SA3400, SA3200D 22 series:RS822RP+, DS3622xs+, DS2422+ 21 series:RS4021xs+, RS3621xs+, RS3621RPxs, RS2421RP+, RS2421+, RS1221RP+, RS1221+, DS1821+, DS1621xs+, DS1621+ 20 series:RS820RP+ 19 series:RS1619xs+, DS2419+, DS1819+ 18 series:RS3618xs, RS2818RP+, RS2418RP+, RS2418+, DS3018xs, DS1618+ 17 series:RS18017xs+, RS4017xs+, RS3617xs+, RS3617RPxs, DS3617xs
	Notes	DSM version requirement: 6.2.3-25426 or later version

Notes:

1. Model specifications are subject to change without prior notice.
2. The figures are based on Synology internal testing. Each performance test is done individually. No other services or applications are processed at the same time.
3. The actual performance may be lower than lab testing figure due to differences in server configuration, deployment, and the number of active operations.
4. If usage requirements exceed the specifications above, please contact our regional partners for professional advice.