APC Back-UPS 800VA, 230V, AVR, Universal and IEC Sockets – BX800LI-MS
APC Back-UPS 800VA, 230V, AVR, Universal and IEC Sockets
-
Battery Backup & Surge Protector for Electronics and Computers
-
Includes: User Manual, Warranty card
Overview
BX800LI-MS Features
- Audible alarms
Provides notification of changing utility power and UPS power conditions
- Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
- Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.
- LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
- Overload protection
Safeguards unit from damage by automatically turning it off in the event of a short circuit or overload.
- Resettable circuit breakers
Enables a quick recovery from overload events.
Back-UPS Features & Benefits
Protection
Surge only outlets
Battery and surge protected outlets
Availability
Intelligent battery management
Automatic self-test
Battery failure notification
Manageability
LED status display
Audible alarms
Safety
Safety-agency approved
Marketing Features
Battery-protected and surge-only outlets
Detailed Tech Specification
Output
-
Output power capacity
415Watts / 800VA
-
Max Configurable Power (Watts)
415Watts / 800VA
-
Nominal Output Voltage
230V
-
Output Frequency (sync to mains)
50/60 Hz +/-1 Hz
-
Output Frequency (not synced)
50/60 Hz +/-1 Hz
-
Topology
Line Interactive
-
Waveform type
Stepped approximation to a sinewave
-
Output Connections(1) IEC 320 C13 (Battery Backup)
-
Transfer Time
4ms typical : 6ms maximum
Input
-
Nominal Input Voltage
230V
-
Input frequency
50/60 Hz +/- 3 Hz (auto sensing)
-
Input Connections
IEC-320 C14, NEMA 5-15P
-
Cord Length
1.22meters
-
Input voltage range for main operations
140 – 300V
-
Number of Power Cords
1
-
Type of Input Protection Required
3-pole breaker
-
Maximum Input Current
7.0A
-
Input Power Factor at Full Load
0.52
Batteries & Runtime
-
Battery type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
-
Included Battery Modules
1
-
Typical recharge time
6hour(s)
-
Replacement Battery
-
Expected Battery Life (years)
2 – 4
-
Runtime
-
Efficiency
Communications & Management
-
Control panel
LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : and Overload Indicators
-
Audible Alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Surge Protection and Filtering
-
Surge energy rating
273Joules
Physical
-
Maximum Height
200mm , 20.0CM
-
Maximum Width
115mm , 11.5CM
-
Maximum Depth
256mm , 25.6CM
-
Net Weight
6.5KG
-
Shipping weight
6.7KG
-
Shipping Height
290mm , 29.0CM
-
Shipping Width
205mm , 20.5CM
-
Shipping Depth
345mm , 34.5CM
-
Color
Black
Environmental
-
Operating Temperature
0 – 40 °C
-
Operating Relative Humidity
0 – 95 %
-
Operating Elevation
0-3000meters
-
Storage Temperature
-15 – 40 °C
-
Storage Relative Humidity
0 – 95 %
-
Storage Elevation
0-9000meters
-
Audible noise at 1 meter from surface of unit
45.0dBA
Conformance
-
Approvals
CE, WEEE
-
Standard warranty
2 years repair or replace
Sustainable Offer Status
-
RoHS
Compliant
-
REACH
REACH: Contains No SVHCs
