APC Easy UPS 1000VA Without Battery w/Selectable Charger and Flooded/SMF Compatible 230V – BVX1000UXI
Overview
BVX1000UXI Features
Run time for load
—
Max. Capacity Used
Output power capacity
600 Watts / 1.0kVA
Output Connections
(6) IEC 60320 C13 (Battery Backup)
Nominal Output Voltage
230V
Nominal Input Voltage
230V
Input Connections
BS1363A British
Cord Length
1.2meters
APC Easy UPS 1000VA Without Battery with Selectable Charger and Flooded/SMF Compatible 230V
Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments.
Includes: Country-specific detachable power cord, User manual
- Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
- Charger output selector
Allows you to match the Home UPS’s battery charger output to your specific battery size, ensuring the longest possible battery life, by preventing under and over-charging.
Easy UPS Features & Benefits
Safety
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Availability
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Features
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Cold-start capable
Provides temporary battery power when the utility power is out.
Manageability
Audible alarms
Provides notification of changing utility power and UPS power conditions
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Protection
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes .
Detailed Tech Specification
Output
Max Configurable Power (Watts)
600 Watts / 1.0kVA
Efficiency at Full Load
92.0 %
Output Frequency (sync to mains)
50/60 Hz +/- 1 Hz Unsynchronised
Topology
Line interactive
Waveform type
Stepped approximation to a sinewave
Transfer Time
8 ms typical : 12 ms maximum
Input
Input frequency
40 – 70 Hz Auto sensing
Input voltage range for main operations
140 – 290V
Number of Power Cords
1
Efficiency at Full Load
92.0 %
Type of Input Protection Required
Circuit breaker
Batteries & Runtime
Battery type
External battery system
Nominal Battery Voltage
12 V
Battery Charge Power (Watts)
288 Watts
Efficiency
Communications & Management
Control panel
LED Status display with on line : on battery
Audible Alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Surge Protection and Filtering
Surge energy rating
160Joules
Physical
Maximum Height
220MM, 22.0CM
Maximum Width
145MM, 14.5CM
Maximum Depth
395MM, 39.5CM
Net Weight
10.8KG
Shipping weight
11.8KG
Shipping Height
325MM, 32.5CM
Shipping Width
230MM, 23.0CM
Shipping Depth
472MM, 47.2CM
Color
Black
Environmental
Operating Temperature
0 – 40 °C
Operating Relative Humidity
0 – 95 (Non-condensing) %
Operating Elevation
0 – 3000meters
Storage Temperature
-20 – 50 °C
Storage Relative Humidity
0 – 95 (Non-condensing) %
Storage Elevation
0 – 15000meters
Audible noise at 1 meter from surface of unit
55.0dBA
Protection Class
IP20
Conformance
Approvals
CE, EN/IEC 62040-1, EN/IEC 62040-2
Standard warranty
2 years repair or replace
