APC NetShelter SV 42U 600mm Wide x 1200mm Deep Enclosure with Sides RAL7035 – AR2500G
Overview
NetShelter SV Features & Benefits
Compatibility
-
Schneider Electric Rack Systems CompatibleCompatible with a variety of Schneider Electric rack accessory products to provide the ability to create a complete rack system. Configure rack solutions using industry leading Schneider Electric Design Portal – Small IT Solution Designer configurator complete with verification of product compatibility and useful 3rd party equipment catalog to aid in visualizing your ideal rack solution.
-
Vendor-neutral EIA-310 19in Rack Mounting Compatibility GuaranteedVendor-neutral mounting for guaranteed compatibility with all EIA-310 compliant 19″ equipment. The “Fits Like a Glove” money back guarantee provides peace of mind that all of your EIA-310-E compliant rack-mount equipment will physically fit in a NetShelter.
Safety
-
Integrated electrical groundingThe roof, side panels and front and rear doors are grounded to the frame of the enclosure. Eight additional electrical grounding inserts are located on the frame for external grounding.
-
Enclosure to floor bolt-down brackets providedEnclosure is delivered with bolt-down brackets that secure the enclosure to the pallet during shipment. These same bolt-down brackets can be utilized to bolt the enclosure to the floor at the final installation site.
Agility
-
Standard-profile castors and adjustable leveling feet from underneathEnclosures are shipped standard with both leveling feet and castors. Leveling feet can be adjusted using a wrench from underneath the enclosure.
-
Joining hardware providedEnclosures include pre-installed joining hardware for joining enclosures in a row and provide additional stability to the enclosure. Enclosures are pre-installed with joining brackets for joining enclosures on 600-mm centers. Joining brackets for joining enclosures on 24-in centers are included with the provided hardware kit.
-
Adjustable mounting rails with simple alignmentThe vertical mounting rails can be adjusted in 0.4 in (10 mm) increments covering virtually any mounting requirement for IT equipment. Align the mounting rails with the opposite side of the enclosure by identifying the hole position used. U positions are numbered front and back for rapid installation of equipment.
-
Split rear doorsSplit rear doors improve access and serviceability to rear of rack mounted equipment. The split rear doors help to maximize floor space. Only 11 inches (279 mm) of clearance is required behind the enclosures to allow for door swing.
-
Pre-installed rear accessory mounting bracketsIntegrated and adjustable rear accessory mounting brackets provide zero U mounting locations for toolless accessories. Each bracket has two mounting bays to support a combination of up to four accessories such as Rack PDUs and vertical cable organizers mounted inside the rack. Adjust the brackets from their standard factory positions or install additional brackets (AR824002 – Qty 2) to install half enclosure height accessories such as cable managers and vertical Rack PDUs.
-
Unassembled enclosure option (42U x 600mmW x 1060mmD) for unique sitesNot all installation sites have space clearance required to move and install standard height enclosures. This unassembled option is packaged for transport through narrow spaces and assembly at the installation site.
Convenience
-
Removable full-height side panelsSide panels are removable for ease of access to the enclosure during equipment installation and setup. Side panels are lockable utilizing a single key that is also usable on the front and rear doors.
-
Enclosure adjustment tools and hardware providedAll enclosures are provided standard with hardware bag that includes hardware for mounting IT equipment and tools for simple enclosure adjustment.
-
Cable access openings and panelsLarge cable access slots in the roof provides access for overhead cable egress. The bottom design allows for unobstructed cable access through a raised floor. Brushes included in roofs for 800mm (32 in) wide enclosures.
-
Simple SelectionNo need to spend hours choosing from and compiling dozens of part numbers to create a single enclosure. Schneider Electric has made it easy by handling the details and providing complete enclosures with single part numbers.
-
Perforated front and rear doorsPerforated front and rear doors provide ample ventilation for rack-mount equipment.
-
Quick release doors with spring pin designFront door can be moved to the opposite side or interchanged with rear doors. Doors are easily removed with simple spring hinge pin design.
Detailed Tech Specification
Physical
-
Maximum Height
2057mm , 205.7CM
-
Maximum Width
600mm , 60.0CM
-
Maximum Depth
1200mm , 120.0CM
-
Rack Height
42U
-
Net Weight
121.3KG
-
Shipping weight
140.0KG
-
Shipping Height
2181mm , 218.1CM
-
Shipping Width
700mm , 70.0CM
-
Shipping Depth
1300mm , 130.0CM
-
Color
Black
-
Maximum Mounting Depth
917.0mm , 91.69CM
-
Minimum Mounting Depth
6.6inches
-
Front Door
16.0gauge
-
Vertical Posts
18.0gauge
-
Rear Door
16.0gauge
-
Roof
19.0gauge
-
Side Panels
18.0gauge
-
Rack Width
19″
Environmental
-
Protection Class
IP 20
Conformance
-
Approvals
UL 2416, UL 60950-1
-
Standard warranty
5 year repair or replace
Sustainable Offer Status
-
RoHS
Compliant
-
REACH
REACH: Contains No SVHCs
