APC Performance SurgeArrest 8 outlets with Phone, Coax & Network Protection 230V Germany – PF8VNT3-GR
AED 307.00 excl. VAT
For Immediate delivery requirement contact sales team. Ex-Stock Usually Ship in 1 -3 days, Back to Back 4-8 Weeks. Images are for illustration purposes only and may differ from actual product.
Out of stock product
APC Performance SurgeArrest 8 outlets with Phone, Coax & Network Protection 230V Germany – PF8VNT3-GR
Overview
PF8VNT3-GR Features
APC Performance SurgeArrest 8 outlets with Phone, Coax & Network Protection 230V Germany
-
Always on Outlets8 outlet models offer dedicated space to accommodate wide transformer blocks without covering adjoining outlets and 2 always on outlets. You can plug 8 power cords including 3 transformers at the same time. In case you have equipment that has to stay on all the time, such as fax machine, you can plug it in always on outlets. The equipment will be protected and will have power supply even when the unit is switched off.
-
Manual disconnect switchEnables the surge supressor to be de-energized for service without disconnecting the protected load.
-
OutletsEnough outlets for your game console, TV and four other electronic devices. Protection from surges, spikes and even lightning is guaranteed.
-
Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse.
-
Right Angle PlugPlug angle allows for equipment and furniture to be placed closer to the wall than with a standard power cord. Reduces cord stress too.
-
Status Indicator LED’sLED status indicators for each phase and an audible alarm provide immediate failure notification when surge suppression circuitry has been damaged by a heavy strike or surge.
SurgeArrest Performance Features & Benefits
Protection
-
Noise FilteringAttenuates EMI/RFI line noise that can cause data errors and keyboard lockups, ensuring better performance of protected equipment.
-
Phone Line SplitterAllows use of two pieces of equipment at once, such as a modem and phone.
-
IEEE let-through rating and UL 1449 complianceThe ‘Institute of Electrical and Electronics Engineers’ (IEEE) Let-Through Voltage rating is based on a test that subjects a Surge Protector to a 6,000 volt spike. The rating equates to the amount of excess voltage that reaches connected equipment. The lower the number, the better the performance of the Surge Protector is. Underwriter’s Laboratory’s UL1449 surge protection safety standard uses these ratings to help users gauge performance. UL’s best Transient Voltage Surge Suppressor (TVSS) Let-Through Voltage rating is “300V”.
-
Data-line ProtectionProtection of data lines (Ethernet, Coaxial and Phone lines) ensures complete protection of your equipment from surges. It is very important to protect your equipment from “back door” electric surges traveling through data lines, as they can be as damaging to your equipment as surges traveling over power lines.
-
Lightning and Surge ProtectionSurgeArrest components such as MOVs and Thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC SurgeArrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.
Convenience
-
Transformer Block SpacingConnect bulky transformer block plugs without covering up other outlets.
-
180 degree Rotating Cord RetainerA 180-degree rotating cord with strain relief offers flexibility in positioning the SurgeArrest, and in routing the power cord.
Marketing Features
-
Cord ManagementReduces cord clutter.
-
180 degree Rotating Cord RetainerA 180-degree rotating cord with strain relief offers flexibility in positioning the SurgeArrest, and in routing the power cord.
-
Fail Safe ModeMost other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APC’s SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply ensuring that no damaging surges reach your equipment.
-
Lightning and Surge ProtectionTo prevent damage to your equipment from electric power surges and spikes.
-
Data-line ProtectionProtection of data lines (Ethernet, Coaxial and Phone lines) ensures complete protection of your equipment from surges. It is very important to protect your equipment from “back door” electric surges traveling through data lines, as they can be as damaging to your equipment as surges traveling over power lines.
Safety
-
Cord ManagementTo help organize power cords.
-
Fail Safe ModeMost other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APC’s SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply ensuring that no damaging surges reach your equipment.
-
Protection working indicatorSurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.
-
Site wiring fault indicatorIn order to work properly, surge suppressors require a correctly wired and grounded outlet. APC surge protectors identify dangerous wiring problems before you plug in your equipment.
-
Adjustable Cable ManagementKeeps cords and cables neat and organized.
-
Catastrophic Event ProtectionSurgeArrest components such as MOVs and Thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC SurgeArrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.
-
Plug Activated Safety ShuttersShutters protect users from accidental contact with unused outlets.
-
Overload IndicatorIndicator illuminates when connected equipment draws more power than unit’s capacity. To remedy the condition, unplug less vital equipment.
Detailed Tech Specification
Output
-
Number of Outlets
8.0
-
Receptacle Style
CEE 7 Schuko
Input
-
Nominal Input Voltage
230V
-
Input frequency
50/60 Hz +/- 5 Hz (auto sensing)
-
Input Connections
Schuko CEE 7 / EU1-16P
-
Cord Length
3.05meters
-
Number of Power Cords
1
-
Maximum Line Current
10A
Surge Protection and Filtering
-
Surge energy rating
2525Joules
-
Data Line Protection
RJ-11 2-Way Modem/Fax/DSL splitter with protection (four wire dual lines), RJ45 10/100 Base-T Ethernet protection, Cable modem / Video protection
-
eP Joule Rating
3400
-
Data Lines Protected
(multi-line only)1-4 RJ11 / 3-6 RJ45
-
Peak Current Common Mode
30kAmps
-
Peak Current Normal Mode
40 (/PH)kAmps
Physical
-
Maximum Height
372mm , 37.2CM
-
Maximum Width
122mm , 12.2CM
-
Maximum Depth
42mm , 4.2CM
-
Net Weight
1.26KG
-
Shipping weight
1.32KG
-
Shipping Height
381mm , 38.1CM
-
Shipping Width
216mm , 21.6CM
-
Shipping Depth
51mm , 5.1CM
-
Color
Charcoal
-
Master Carton Units
12.0
-
Units per Pallet
60.0
-
SCC Codes
1073130422365 5
Environmental
-
Operating Temperature
0 – 40 °C
-
Operating Relative Humidity
0 – 95 %
-
Operating Elevation
0-15000meters
-
Storage Temperature
-15 – 45 °C
-
Storage Relative Humidity
0 – 95 %
-
Storage Elevation
0-15000meters
Conformance
-
Approvals
CE
-
Equipment protection policy
Lifetime : 100000 Euro
-
Standard warranty
5 years (all other countries), Lifetime (European Union countries only)
Sustainable Offer Status
-
RoHS
Compliant
-
PEP
Available in Documentation tab
-
EOLI
Available in Documentation tab
Be the first to review “APC Performance SurgeArrest 8 outlets with Phone, Coax & Network Protection 230V Germany – PF8VNT3-GR”
Related products
Reviews
There are no reviews yet.