APC Power-Saving Back-UPS ES 8 Outlet 700VA 230V CEE 7/7 – BE700G-SP
Overview
BE700G-SP Features
APC Power-Saving Back-UPS 700, 230V CEE 7/7
-
Adjustable voltage sensitivityProvides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
-
Audible alarmsProvides notification of changing utility power and UPS power conditions
-
Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.
-
Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenance
-
Battery replacement without toolsEnables fast battery replacement, lowering Mean Time to Repair (MTTR).
-
Battery-protected and surge-only outletsReserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
-
Cold-start capableProvides temporary battery power when the utility power is out.
-
Data-line ProtectionProtection of data lines (Ethernet, Coaxial and Phone lines) ensures complete protection of your equipment from surges. It is very important to protect your equipment from “back door” electric surges traveling through data lines, as they can be as damaging to your equipment as surges traveling over power lines.
-
Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replaced
-
Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
-
USB connectivityProvides management of the UPS via a USB port (not available on all models).
-
User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Back-UPS Features & Benefits
Marketing Features
-
Battery-protected and surge-only outletsReserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Safety
-
Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Protection
-
Battery and surge protected outletsBack up and protect your hardware and data during power outages, surges and spikes.
-
Surge only outletsProtect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Manageability
-
LED status displayQuickly understand unit and power status with visual indicators.
-
Audible alarmsProvides notification of changing utility power and UPS power conditions
Availability
-
Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.
-
Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.
-
Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenance
Detailed Tech Specification
Output
-
Output power capacity
405Watts / 700VA
-
Max Configurable Power (Watts)
405Watts / 700VA
-
Nominal Output Voltage
230V
-
Output Frequency (sync to mains)
47 – 63 Hz
-
Output Frequency (not synced)
50Hz +/- 0.1% for 50Hz nominal
-
Topology
Standby
-
Waveform type
Stepped approximation to a sinewave
-
Output Connections(4) Schuko CEE 7 (Battery Backup)(4) Schuko CEE 7 (selector_surgetitle)
-
Output Voltage Tolerance
+/- 5% static and 100% load step
-
Transfer Time
6ms typical : 10ms maximum
Input
-
Nominal Input Voltage
230V
-
Input frequency
50/60 Hz +/- 5 Hz (auto sensing)
-
Input Connections
Russian
-
Cord Length
1.83meters
-
Maximum Input Current
10.0A
Batteries & Runtime
-
Battery type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
-
Typical recharge time
16hour(s)
-
Replacement Battery
-
Expected Battery Life (years)
3 – 5
-
Runtime
-
Efficiency
Communications & Management
-
Interface Port(s)
USB
-
Control panel
LED status display with On Line : On Battery : Replace Battery and Overload indicators
Surge Protection and Filtering
-
Surge energy rating
310Joules
-
Data Line Protection
Analog phone line for phone/fax/modem/DSL (RJ-11 connector), Network line – 10/100 Base-T Ethernet (RJ-45 connector)
-
Filtering
Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449
Physical
-
Maximum Height
89mm , 8.9CM
-
Maximum Width
224mm , 22.4CM
-
Maximum Depth
311mm , 31.1CM
-
Net Weight
6.93KG
-
Shipping weight
7.84KG
-
Shipping Height
127mm , 12.7CM
-
Shipping Width
279mm , 27.9CM
-
Shipping Depth
400mm , 40.0CM
-
Color
Black
-
Master Carton Dimensions (Length x Width x Height)
324mm
-
Master Carton Units
2.0
-
Master Carton Weight
16.36
-
Pallet Dimensions
48inches
-
# of Layers per Pallet
4.0
-
# of Units per Layer per Pallet
20.0
-
Pallet Weight
1400.0lbs.
-
Units per Pallet
48.0
-
SCC Codes
1073130427162 5
Environmental
-
Operating Temperature
0 – 40 °C
-
Operating Relative Humidity
0 – 95 %
-
Operating Elevation
0-9000meters
-
Storage Temperature
-15 – 40 °C
-
Storage Relative Humidity
0 – 95 %
-
Storage Elevation
0-9000meters
-
Audible noise at 1 meter from surface of unit
40.0dBA
Conformance
Approvals
Equipment protection policy
Standard warranty
Sustainable Offer Status
RoHS
REACH
PEP
EOLI
Reviews
There are no reviews yet.