APC Smart-UPS SRT 3000VA 208/230V LCD rackmount 2U – SRT3000RMXLW-IEC

Name: APC Smart-UPS SRT 3000VA 208/230V LCD rackmount 2U - SRT3000RMXLW-IEC
SKU: SRT3000RMXLW-IEC
Price: 10761.70 AED
Availability: InStock

APC Smart-UPS SRT 3000VA, 230V, LCD, rackmount, 2U, 8x IEC 60320 C13 & 2x IEC Jumpers & 2x IEC 60320 C19 outlets

Overview

SRT3000RMXLW-IEC Features

Run time for load

3m 58s

Max. Capacity Used

100%

Output power capacity

2.7kWatts / 3.0kVA

Rack Height

Output Connections

(2) IEC Jumpers (Battery Backup)

(6) IEC 60320 C13 (Battery Backup)

(2) IEC 60320 C19 (Battery Backup)

Nominal Output Voltage

208V, 230V

Nominal Input Voltage

208V, 230V

Input Connections

BS1363A British, IEC 60320 C20, Schuko CEE 7 / EU1-16P

Cord Length

2.4meters

APC Smart-UPS SRT 3000VA, 230V, LCD, rackmount, 2U, 8x IEC 60320 C13 & 2x IEC Jumpers & 2x IEC 60320 C19 outlets

APC Smart-UPS SRT 3000VA, 208/230V, LCD, rackmount, 2U

High density, double-conversion on-line power protection with scalable runtime.

Includes: CD with software, Documentation CD, Installation guide, Rack mounting brackets, Rack mounting support rails, USB cable, Warranty card

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
ECO Mode
Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.
Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

APC Smart-UPS SRT 3000VA, 230V, LCD, rackmount, 2U, 8x IEC 60320 C13 & 2x IEC Jumpers & 2x IEC 60320 C19 outlets

Smart-UPS On-Line Features & Benefits

Rack/Tower convertible

Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Flash upgradeable firmware

Install maintenance releases of firmware remotely using FTP.

Plug-and-Play external batteries

Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

Automatic restart of loads after UPS shutdown

Automatically starts up the connected equipment upon the return of utility power.

Scalable runtime

Allows additional run time to be quickly added as needed.

Hot-swappable batteries

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Temperature-compensated battery charging

Prolongs battery life by regulating the charge voltage according to battery temperature.

Automatic internal bypass

Supplies utility power to the connected loads in the event of a UPS power overload or fault.

Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.

InfraStruXure Manager Compatible

Enables centralized management via the APC InfraStruXure Manager.

Intelligent Card Slot

Customize UPS capabilities with management cards.

Serial connectivity

Provides management of the UPS via a serial port.

LED status indicators

Quickly understand unit and power status with visual indicators.

Network manageable

Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.

Low operating and maintenance costs with proven reliability and intelligent battery management .

Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.

Peace of mind that comes with full equipment compatibility and reliability of a leader

Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.

Avoids costly power problems by keeping your IT equipment and data protected and available .

Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.

Save time with easy and convenient remote/network accessibility.

Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.

Generator compatible

Ensures clean, uninterrupted power to protected equipment when generator power is used.

Input power factor correction

Minimizes installation costs by enabling the use of smaller generators and cabling.

Cold-start capable

Provides temporary battery power when the utility power is out.

Frequency and voltage regulation

Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Power conditioning

Protects connected loads from surges, spikes, lightning, and other power disturbances.

Resettable circuit breaker

Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)

User-replaceable batteries

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Disconnected battery notification

Warns when a battery is not available to provide backup power.

Audible alarms

Provides notification of changing utility power and UPS power conditions

Predictive failure notification.

Provides early-warning fault analysis ensuring proactive component replacement.

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

APC Smart-UPS SRT 3000VA, 230V, LCD, rackmount, 2U, 8x IEC 60320 C13 & 2x IEC Jumpers & 2x IEC 60320 C19 outlets

Detailed Tech Specification

Max Configurable Power (Watts)

2.7kWatts / 3.0kVA

Output Voltage Note

Configurable for 220 : 230 or 240 nominal output voltage

Output Voltage Distortion

Less than 2 %

Output Frequency (sync to mains)

50/60 Hz +/- 3 Hz Sync to mains

Other Output Voltages

220 V, 240 V

Load Crest Factor

3 : 1

Topology

Double conversion online

Waveform type

Sine wave

Bypass

Internal bypass (automatic and manual)

Input frequency

40 – 70 Hz Auto-sensing

Input voltage range for main operations

100 – 275 Adjustable (half load)V

Number of Power Cords

Other Input Voltages

220 V, 240 V

Battery type

Lead-acid battery

Included Battery Modules

Typical recharge time

3hour(s)

Nominal Battery Voltage

96 V

Replacement Battery

APCRBC152

Expected Battery Life (years)

3 – 5

RBC Quantity

Battery Charge Power (Watts)

168 Watts

Extendable Run Time

Runtime

View Runtime Graph

Efficiency

View Efficiency Graph

Interface Port(s)

RJ-45 Serial, Smart-Slot, USB

Control panel

Multifunction LCD status and control console

Audible Alarm

Audible and visible alarms prioritized by severity

Emergency Power Off (EPO)

Yes

Available SmartSlot™ Interface Quantity

Surge energy rating

340Joules

Maximum Height

85MM, 8.5CM

Maximum Width

432MM, 43.2CM

Maximum Depth

635MM, 63.5CM

Net Weight

31.3KG

Shipping weight

39.92KG

Shipping Height

246MM, 24.6CM

Shipping Width

599MM, 59.9CM

Shipping Depth

871MM, 87.1CM

Color

Black

Units per Pallet

6.0

Operating Temperature

0 – 40 °C

Operating Relative Humidity

0 – 95 (Non-condensing) %

Operating Elevation

0 – 3048meters

Storage Temperature

-15 – 45 °C

Storage Relative Humidity

0 – 95 (Non-condensing) %

Storage Elevation

0 – 15240meters

Audible noise at 1 meter from surface of unit

55.0dBA

Online thermal dissipation

703.0BTU/hr

Protection Class

IP20

Approvals

CE, CE Mark, CSA C22.2 No 107.3-05, EAC, EN/IEC 62040-1, EN/IEC 62040-2, ENERGY STAR V2.0 (USA), FCC part 15 class A, OSHPD, RCM, UL 1778, VDE

Standard warranty

3 years repair or replace (excluding battery) and 2 years for battery

RoHS

Compliant

Proposition 65 Warning

Available in Documentation tab

Sign up for Newsletter

About Us

Authorized Partner – Certificates

APC Smart-UPS SRT 3000VA 208/230V LCD rackmount 2U – SRT3000RMXLW-IEC

APC Smart-UPS SRT 3000VA 208/230V LCD rackmount 2U – SRT3000RMXLW-IEC

Overview

SRT3000RMXLW-IEC Features

APC Smart-UPS SRT 3000VA, 208/230V, LCD, rackmount, 2U

Smart-UPS On-Line Features & Benefits

Adaptability

Availability

Manageability

Marketing features

Protection

Serviceability

Detailed Tech Specification

Output

Input

Batteries & Runtime

Communications & Management

Surge Protection and Filtering

Physical

Environmental

Conformance

Sustainable Offer Status

Signup for Newsletter

Sign up for Newsletter

About Us

Authorized Partner – Certificates

APC Smart-UPS SRT 3000VA 208/230V LCD rackmount 2U – SRT3000RMXLW-IEC

APC Smart-UPS SRT 3000VA 208/230V LCD rackmount 2U – SRT3000RMXLW-IEC

Overview

SRT3000RMXLW-IEC Features

APC Smart-UPS SRT 3000VA, 208/230V, LCD, rackmount, 2U

Smart-UPS On-Line Features & Benefits

Adaptability

Availability

Manageability

Marketing features

Protection

Serviceability

Detailed Tech Specification

Output

Input

Batteries & Runtime

Communications & Management

Surge Protection and Filtering

Physical

Environmental

Conformance

Sustainable Offer Status

Related products

Login