APC Smart-UPS VT rack mounted 30kVA 400V w/3 batt mod. exp. to 5, w/PDU & startup – SUVTR30KH3B5S

Product Category; Uninterruptible Power Supply (UPS)

Product Family; Smart-UPS VT

Input Voltage; 400 3PH

Output Voltage; 400 3PH

SUVTR30KH3B5S  Features

APC Smart-UPS VT rack mounted 30kVA 400V w/3 batt mod. exp. to 5, w/PDU & startup

• Field-replaceable power distribution panel
  Ensures compatibility with equipment that has different plug types.
• Locking cabinet
  Prevents unauthorized access to the UPS.
• Multiple cable-entry points
  Provides flexibility of UPS placement in the room and easy access to install cabling to the terminal blocks.
• Resettable circuit breakers
  Enables a quick recovery from overload events.

Smart-UPS VT  Features & Benefits

Sustainability

• EU CoC for UPS
  Ensures that UPSs sold in the EU are highly efficient

Total Cost of Ownership

• Temperature-compensated battery charging
  Prolongs battery life by regulating the charge voltage according to battery temperature.
• Input power factor correction
  Minimizes installation costs by enabling the use of smaller generators and cabling.
• Intelligent battery management
  Maximizes battery performance, life, and reliability through intelligent, precision charging.
• Manual maintenance bypass
  Reduces installation costs by eliminating the need for an external mechanical bypass.

Protection

• Cold-start capable
  Provides temporary battery power when the utility power is out.
• Frequency and voltage regulation
  Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
• Safety-agency approved
  Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Serviceability

• Shippable with modules installed
  Enables pre-installation UPS staging and testing and faster installation.
• Modular design
  Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
• Automatic self-test
  Periodic battery self-test ensures early detection of a battery that needs to be replaced.
• Battery replacement without tools
  Enables fast battery replacement, lowering Mean Time to Repair (MTTR).

Manageability

• Programmable frequency
  Ensures compatibility with different input frequencies.
• Network manageable
  Provides remote power management of the UPS over the network.
• Audible alarms
  Provides notification of changing utility power and UPS power conditions
• LCD display
  Alpha-Numeric Display which displays system parameters and alarms.
• InfraStruXure Manager Compatible
  Enables centralized management via the APC InfraStruXure Manager.
• SmartSlot
  Customize UPS capabilities with management cards.
• LED status indicators
  Quickly understand unit and power status with visual indicators.

Availability

• Dual mains input
  Increases availability by allowing the UPS to be connected to two separate power sources.
• Generator compatible
  Ensures clean, uninterrupted power to protected equipment when generator power is used.
• Scalable runtime
  Allows additional run time to be quickly added as needed.
• Battery modules connected in parallel
  Delivers higher availability through redundant batteries.
• Automatic internal bypass
  Supplies utility power to the connected loads in the event of a UPS power overload or fault.

Marketing Features

• Scalable runtime
  Allows additional run time to be quickly added as needed.
• Dual mains input
  Increases availability by allowing the UPS to be connected to two separate power sources.
• Manual maintenance bypass
  Reduces installation costs by eliminating the need for an external mechanical bypass.
• Network manageable
  Provides remote power management of the UPS over the network.
• Input power factor correction
  Minimizes installation costs by enabling the use of smaller generators and cabling.
• Hot-swappable batteries
  Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Technical Specifications

Output

• Output power capacity

  24.0 KWatts / 30.0 kVA

• Max Configurable Power (Watts)

  24.0 KWatts / 30.0 kVA

• Nominal Output Voltage

  400V 3PH

• Output Voltage Note

  Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage

• Efficiency at Full Load

  96.4 %

• Output Voltage Distortion

  Less than 5% at full load

• Output Frequency (sync to mains)

  47 – 53 Hz for 50 Hz nominal

• Output Frequency (not synced)

  50Hz +/- 0.1% for 50Hz nominal

• Other Output Voltages

  380, 415

• Load Crest Factor

  Unlimited

• Topology

  Double Conversion Online

• Waveform type

  Sine wave

• Overload Operation

  60 seconds @ 125% and 30 seconds @ 150%

• Maximum Output Current

  48

• Output Connections
  (12) IEC 320 C19 (Battery Backup)
• Bypass

  Built-in Maintenance Bypass, Built-in Static Bypass

Input

• Nominal Input Voltage

  400V 3PH

• Input frequency

  40 – 70 Hz

• Input Connections

  Hard Wire 5-wire (3PH + N + G)

• Input voltage range for main operations

  304 – 477V

• Efficiency at Full Load

  96.4 %

• Maximum Input Current

  41.0A

• Input Power Factor at Full Load

  0.98

Batteries & Runtime

• Battery type

  VRLA

• Included Battery Modules

  3

• Typical recharge time

  3hour(s)

• Replacement Battery

  SYBT4

• Battery Slots Empty

  2

• Expected Battery Life (years)

  3 – 5

• RBC Quantity

  3

• Extended Run Options

  APC-Smart-UPS-VT-rack-mounted-30kVA-400V-w-3-batt-mod-exp-to-5-w-PDU-startup

• Runtime
  View Runtime Graph
  View Runtime Chart

Communications & Management

• Interface Port(s)

  DB-9 RS-232 , SmartSlot

• Pre-Installed SmartSlot™ Cards

  AP9631

• Control panel

  Multi-function LCD status and control console

• Audible Alarm

  Audible and visible alarms : configurable delays

• Emergency Power Off (EPO)

  Yes

Physical

• Maximum Height

  1995mm , 199.5cm

• Maximum Width

  600mm , 60.0cm

• Maximum Depth

  1075mm , 107.5cm

• Net Weight

  565.0kg

• Shipping weight

  691.36kg

• Shipping Height

  2095mm , 209.5cm

• Shipping Width

  756mm , 75.6cm

• Shipping Depth

  1206mm , 120.6cm

• Color

  Black

Environmental

• Operating Environment

  0 – 40 °C

• Operating Relative Humidity

  0 – 95 %

• Operating Elevation

  0-999.9meters

• Storage Temperature

  -50 – 40 °C

• Storage Relative Humidity

  0 – 95 %

• Storage Elevation

  0-15000meters

• Audible noise at 1 meter from surface of unit

  67.0dBA

• Online thermal dissipation

  3685.0BTU/hr

• Protection Class

  IP 20

Conformance

• Approvals

  C-tick, CE, EN 50091-2, EN/IEC 62040-3, IEC 61000-3-2, IEC 61000-3-3, ISO 14001, ISO 9001, RCM, VFI-SS-111

• Standard warranty

  1 year repair or replace, Start-Up Service