MGE Galaxy 5500 80kVA 400V Single UPS, Start-up 5×8 – G55TUPSU80HS
MGE Galaxy 5500 80kVA 400V Single UPS, Start-up 5×8A versatile 3-phase UPS for facility, industrial and data center applications. Configurable system with a comprehensive range of accessories to meet your application demands.
Product Overview
Galaxy 5500Features & Benefits
Adaptability
-
Flexible DesignAvailable in a wide range of configurations to suit any operating environment
Availability
-
Parallel-capacity capableIncreases total power capacity by using multiple uninterruptible power supplies simultaneously.
-
Parallel-redundant capablePower the connected equipment with multiple uninterruptible power supplies to increase system redundancy
-
Frequency and voltage regulationGives higher application availability by correcting poor frequency and voltage conditions without using the battery.
-
Dual mains inputIncreases availability by allowing the UPS to be connected to two separate power sources.
-
Advanced electrical featuresExcellent power conditioning, very low harmonic distortion through IGBT rectifier, input power factor correction, and high power efficiency
-
Generator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.
Serviceability
-
Multiple levels of serviceWith the option of packages or individual service components, our services are structured to allow you to pick and choose what you would like APC to do for you.
-
Front-access servicingSimplifies installation and UPS maintenance while minimizing space requirements.
-
Technical supportOur experienced technical support engineers are available to answer your questions, giving you peace of mind knowing the help you need is there when you need it.
Manageability
-
Integrates with StruxureWare CentralAn IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network
-
Network management capabilityFull-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet.
-
LED IndicatorsProvide easy-to-read status of the unit and utility power conditions.
-
LCD graphics displayText and mimic diagrams that display modes of operation, system parameters and alarms.
Sustainability
-
EU CoC for UPSEnsures that UPSs sold in the EU are highly efficient
Total Cost of Ownership
-
ECO ModeOperating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
-
Input power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling.
-
Wide input voltage rangeDesigned for harsh electrical environments to save battery life.
-
Predicitive failure notificationProvides early-warning fault analysis ensuring proactive component replacement.
Detailed Tech Specification
Output
-
Output power capacity
72.0 KWatts / 80.0 kVA
-
Max Configurable Power (Watts)
72.0 KWatts / 80.0 kVA
-
Nominal Output Voltage
400V 3PH
-
Output Voltage Note
Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage
-
Output Voltage Distortion
Less than 2%
-
Output Frequency (sync to mains)
50/60 Hz +/- 3 Hz user adjustable +/- 0.1
-
Output Frequency (not synced)
50Hz +/- 0.1% for 50Hz nominal
-
Other Output Voltages
380, 415
-
Load Crest Factor
3 : 1
-
Topology
Double Conversion Online
-
Waveform type
Sine wave
-
Overload Operation
10 minutes @ 125% and 60 seconds @ 150%
-
Maximum Output Current
360
-
Output Voltage THD
< 1% linear load and < 2.5% nonlinear load
-
Output Voltage Tolerance
+/-1% static and +/- 5% at 100% load step
-
Bypass
Built-in Maintenance Bypass, Built-in Static Bypass, Optional External Bypass
Input
-
Nominal Input Voltage
400V 3PH
-
Input frequency
45 – 65 Hz
-
Input Connections
Hard Wire 4-wire (3PH + G), Hard Wire 4-wire (3PH + N)
-
Input voltage range for main operations
323 – 437 (380V), 340 – 460 (400V), 353 – 477 (415V)V
-
Input voltage adjustable range for mains operation
250 – 470V
-
Input Total Harmonic Distortion
Less than 3% for full load
-
Type of Input Protection Required
3-pole breaker
-
Other Input Voltages
380, 415
-
Maximum Short Circuit Withstand (Icw)
30.0kAmps
-
Maximum Input Current
116.0A
-
Input Power Factor at Full Load
1.0
Batteries & Runtime
-
Battery type
No internal battery – uses external battery system
-
Typical recharge time
10hour(s)
-
Nominal Battery Voltage
432V
-
Expected Battery Life (years)
8 – 10
-
Replacement battery cartridge note
Battery runtimes are estimate only.
-
Extended Run Options
-
Efficiency
Communications & Management
-
Pre-Installed SmartSlot™ Cards
-
Control panel
Multi-function LCD status and control console
-
Emergency Power Off (EPO)
Yes
-
Available SmartSlot™ Interface Quantity
2
Physical
-
Maximum Height
1900mm , 190.0CM
-
Maximum Width
712mm , 71.2CM
-
Maximum Depth
850mm , 85.0CM
-
Net Weight
520.0KG
-
Shipping weight
540.0KG
-
Shipping Height
2030mm , 203.0CM
-
Shipping Width
980mm , 98.0CM
-
Shipping Depth
960mm , 96.0CM
Environmental
-
Operating Temperature
0 – 40 °C
-
Operating Relative Humidity
0 – 95 %
-
Operating Elevation
0-3600meters
-
Storage Temperature
-20 – 45 °C
-
Storage Relative Humidity
0 – 95 %
-
Storage Elevation
0-9000meters
-
Audible noise at 1 meter from surface of unit
61.4dBA
-
Protection Class
IP20
Conformance
-
Approvals
CE, EN/IEC 62040-3, IEC 62040-1-2, IEC 62040-2, ISO 9001, TUV, VDE
-
Standard warranty
1 year on-site repair or replace with factory authorized Start-UP, 1 year (parts only)
Sustainable Offer Status
-
Battery Directive
Compliant
-
Battery Notes
ts_Battery_Notes
General
-
Max Bypass Input Current
115.0A
