QNAP 6Gb/s SAS to SATA adapter for QNAP dual-controller Enterprise ZFS NAS 3.5″ drive trays, 4 adapters in a package – QDA-SA-4PCS
QDA-SA
Overview
Features
The QDA-SA adapter is designed for QNAP Enterprise ZFS NAS and allows the use of a SATA 6Gbps drive in a 3.5-inch SAS drive bay – providing the ability to expand storage capacity by using cost-effective SATA drives.
Note: QDA-SA adapters are sold in a pack of four. (Order number: QDA-SA-4PCS)
1. Supports 3.5-inch or 2.5-inch SATA drives.
2. Up to 6 Gb/s file transfer speeds.
3. The installed SATA drive can share SAS dual-port advantages for higher reliability.
Architecture diagram
Note: The connected drive may not reach its optimal performance due to protocol translation and some overhead.
SAS dual-port advantage for fault tolerance
SAS features dual porting for redundancy, eliminating single points of failure and allowing for higher reliability and performance. By installing a SATA drive with the QDA-SA into a dual-controller Enterprise ZFS NAS, the SATA drive can share these SAS dual-port advantages to ensure a high-availability, fault tolerant enterprise storage environment.
Designed for Enterprise ZFS NAS
The QDA-SA is easily installed in the 3.5-inch disk tray of an Enterprise ZFS NAS (Disk tray model: SP-ES-TRAY-WOLOCK). (QES 2.0.0 (or later) is required for the NAS)
Note: QDA-SA does not support SSD TRIM and the drive S.M.A.R.T. feature is not supported on non-QES operating system.
Short Tech Specification
| 6Gb/s SAS to SATA adapter for QNAP dual-controller Enterprise ZFS NAS 3.5″ drive trays, 4 adapters in a package. |
Detailed Tech Specification
Hardware Specs
6Gbps SAS to SATA drive adapter (Designed for Enterprise ZFS NAS) (Legacy)
| Supported Dirves | 1 x 3.5″/2.5″ SATA 6Gbps HDD/SSD |
| Host Interface | SAS 6Gbps |
| Supported Operating Systems | QES 2.0.0 (or later) for dual controller NAS or JBOD |
| Dimension | 104.8 × 21.8 × 17.3 mm |
| Weight | 0.11 kg |
| Note | QDA-SA adapters are sold in a pack of four.
The connected drive may not reach its optimal performance due to protocol translation and some overhead. QDA-SA does not support SSD TRIM and the drive S.M.A.R.T. feature is not supported on non-QES operating system. |
Reviews
There are no reviews yet.