QNAP Single port Thunderbolt3 to single port 10GbE SFP+ adapter, bus powered – QNA-T310G1S
QNA-T310G1S
Overview
Features
The QNAP QNA series is a cost-effective Thunderbolt 3 to 10GbE adapter that empowers your Mac® or Windows® computers with blazing-fast 10GbE network connectivity using a Thunderbolt 3 type-C port. And of course, it can be used with QNAP Thunderbolt™ 3 NAS to add additional 10GbE connectivity. With the portable QNA series adapter, a 10GbE network can be created between your Thunderbolt 3 computer and another 10GbE-capable device or NAS to facilitate high-speed data transfer for large files and help to streamline collaborative workflows to improve efficiency.
Note:
● Windows® devices: The driver for the Marvell AQtion AQC100; Aquantia® is required to use the QNA-T310G1S. Click here to download drivers
● Mac® devices: Supports macOS 10.13.3 (or later). M1 chip compatible.
● Linux: Supports Linux core 3.10, 3.12, 3.2, 4.2, and 4.4. The driver for the Marvell AQtion AQC100; Aquantia® is required to use the QNA-T310G1S. Click here to download drivers
● QNAP Thunderbolt™ 3 NAS: Requires QTS 4.3.6 (or later).
10GbE data transfer that media professionals need
As video resolutions move from 1080p, to 4K, 8K (and beyond) media creators are struggling with the storage and network requirements needed for editing huge multimedia files. The QNA-T310G1S features one 10GbE SFP+ port, allowing you to easily add 10GbE connectivity to any Thunderbolt 3 device. Coupled with a QNAP 10GbE switch, a budget-friendly 10GbE environment can be created for creative studios to benefit from the incredible speed and bandwidth that 10GbE provides.
Learn More: QNAP 10GbE switch
Stylish
The QNA series features a metallic bright-toned cover that fits perfectly alongside other devices.
Portable
The QNA series requires no extra power supply, and you can easily carry it around for universal deployment.
Heat Dissipation
The QNA series has shallow grooves on its top for effective heat dissipation.
How to set the MTU
Mac: Open “System Preferences” → go to “Network” → Select the QNA Thunderbolt Ethernet → click “Advanced…” → go to the “Hardware” tab → change “Configure” to “Manually” → set “MTU” to “9000”.
Windows: Open “Settings” → go to “Network & Internet” → click “Change your adapter options” → right click on the Thunderbolt 3 Ethernet adapter and click “Properties” → click “Configure…” → go to the “Advanced” tab → select “Jumbo Frame” and set the value to “9KB MTU”.
NAS: Open “Network & Virtual Switch” → go to “Network” > “Interfaces” → find the applicable Ethernet adapter, click 
and select “Configure” → go to the “IPv4” tab → set “Jumbo Frame” to 9000.
Short Tech Specification
| Single port Thunderbolt3 to single port 10GbE SFP+ adapter, bus powered |
Detailed Tech Specification
Hardware Specs
Single-port Thunderbolt 3 to single-port 10GbE SFP+
| Network Adapters | Thunderbolt to 10GbE |
| PHY IC | AQC100S |
| I/O | 1 x Thunderbolt 3, 1 x 10GbE SFP+ connector |
| Transmission rates | 10Gbps/1Gbps |
| Package content | QNA-T310G1S, 0.5M Thunderbolt 3 cable and manual. |
| Port and cable | SFP+; SFP+ direct attach cable recommended |
| Note | ● Windows® devices: The driver for the Marvell AQtion AQC107 is required to use the QNA-T310G1T. Click here to download drivers ● Mac devices: Requires macOS 10.13.3 (or later). ● Linux: Supports Linux core 3.10, 3.12, 3.2, 4.2, and 4.4. The driver for the Marvell AQtion AQC107 is required to use the QNA-T310G1T. Click here to download drivers ● QNAP Thunderbolt™ 3 NAS: Requires QTS 4.3.6 (or later). |
