Synology E10M20-T1 M.2 SSD & 10GbE Combo Adapter – E10M20-T1

 

 

E10M20-T1

M.2 SSD & 10GbE combo adapter card for performance acceleration

---

 

Overview

 

Features

10GbE ready

Achieve Multi-Gig Ethernet transmission speeds of up to 10 Gbps.

NVMe enabled

Accelerate random I/O performance with the dual M.2 2280/22110 NVMe SSD slots.

Dedicated cache slots

Free up primary drive bays for data storage.

A perfect match with Synology SNV3000 series NVMe SSD

Install Synology SNV3000 series NVMe SSD on the E10M20-T1 adapter card for fast and streamlined cache acceleration, and take full advantage of Synology SSD’s enterprise-grade endurance, performance, and reliability with your Synology NAS.

---

 

Detailed Tech Specification

 

Hardware Specs

General	Host Bus Interface	PCIe 3.0 x8
	Bracket Height	Low Profile and Full Height
	Size (Height x Width x Depth)	71.75 mm x 200.05 mm x 17.70 mm
	Operating Temperature	0°C to 40°C (32°F to 104°F)
	Storage Temperature	-20°C to 60°C (-5°F to 140°F)
	Relative Humidity	5% to 95% RH
	Warranty	5 Years
	Notes	The warranty period starts from the purchase date as stated on your purchase receipt. (Learn more)
Storage	Storage Interface	PCIe NVMe
	Supported Form Factor	22110 / 2280
	Connector Type and Quantity	M-key, 2 Slots
Network	IEEE Specification Compliance	IEEE 802.3x Flow Control IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3bz 2.5Gbps / 5Gbps Ethernet IEEE 802.3an 10Gbps Ethernet
	Data Transfer Rates	10 Gbps
	Network Operation Mode	Full Duplex
	Supported Features	9 KB Jumbo Frame TCP/UDP/IP Checksum Offloading Auto-negotiation between 100Mb/s, 1Gb/s, 2.5Gb/s, 5Gb/s, and 10Gb/s TCP Segmentation Offload (TSO) Large Send Offload (LSO) Receive Side Scaling (RSS) Generic Receive Offload (GRO) Generic Segmentation Offload (GSO)
Compatibility
Applied Models	NVMe SSD	SA series:SA3400 22 series:RS822RP+, DS3622xs+, DS2422+ 21 series:RS4021xs+, RS3621xs+, RS3621RPxs, RS2421RP+, RS2421+, RS1221RP+, RS1221+ 20 series:RS820RP+ 19 series:DS2419+, DS1819+ 18 series:RS3618xs, RS2818RP+, DS3018xs, DS1618+ 17 series:RS18017xs+, RS4017xs+, RS3617xs+, RS3617RPxs, DS3617xs
	Notes	DSM version requirement: 6.2.3-25426 or later version DSM version requirement for RS18017xs+, RS4017xs+, RS3618xs, RS3617xs+, RS3617RPxs, DS3617xs and DS3617xsII: 7.0.1 or later version

Notes:

1. Model specifications are subject to change without prior notice.
2. The figures are based on Synology internal testing. Each performance test is done individually. No other services or applications are processed at the same time.
3. The actual performance may be lower than lab testing figure due to differences in server configuration, deployment, and the number of active operations.
4. If usage requirements exceed the specifications above, please contact our regional partners for professional advice.